HW κωνικό στεγνωτήριο κενού

HW Conical Paddle Vacuum Dryer Product Brief Introduction:

Vertical Paddle Vacuum Dryer has completely changed the defect of large volume, high energy consumption, long working hours, inefficient, loud noise, easy packing, much missing dots, the uneasy cleaning and inconveniently maintaining.

Επί του παρόντος, είναι η μηχανή ξήρανσης πολλαπλών χρήσεων που έχει την απώλεια ενέργειας ενέργειας, τη μέγιστη απόδοση, το καλύτερο αποτέλεσμα στον ίδιο εξοπλισμό στο εσωτερικό και στο εξωτερικό.

HW Conical Paddle Vacuum Dryer Features:

1 . Vertical Paddle Vacuum Drying Machine is ideal dryer compared with traditional drying machine for material easy caking and granules

2. Vertical Paddle Vacuum Drier Machine is short working hours, high efficiency and large capacity

3. The feeding system for this mixer can be by manual or pneumatic conveyor or vacuum feeder or screw feeder and so on
4. Machine materials : AISISUS304 , AISISUS316L, and other material .
5. For the electrical component , we mainly use international brand such as ABB ,Siemens or Schneider.
6. For the cleaning, the machine can install the spray ball to auto cleaning, but client supply the CIP system .

HW Conical Paddle Vacuum Dryer Constitute:

The Paddle Drying Machine consists of stainless steel vertical container, mixing stir device, discharge device, gear device, senate gas system and so on.

Conical Paddle Vacuum Dryer System characteristic:

Σύστημα θέρμανσης - Με βάση την παραδοσιακή θέρμανση σακάκι δεξαμενών, να προστεθεί με την εσωτερική θερμότητα της έλικας, έτσι ώστε ολόκληρη η περιοχή να γίνει 140 τοις εκατό του δοχείου, ενισχύοντας σημαντικά την αποτελεσματικότητα της θέρμανσης.

Σύστημα αναταραχής - Ο αναδευτής έλικας καθιστά την αναβάθμιση των υλικών και συνεχίζει να κάνει να κόβει και να διανέμεται, να εξασφαλίσει ότι όλα τα maerials μέσα στην χοάνη μετακινούνται πλήρως και κάνουν υλικά σε ένα εξωτερικό χώρο συμπίεσης εκτός από την αναβάθμιση της έλικα από το Έξω, αποφεύγοντας την άκυρη τριβή μεταξύ των υλικών και της δεξαμενής. Ένα μοναδικό υβριδικό που συναντά τα αποτελέσματα ανάμειξης της έλικας, μπορεί να αυξήσει την περιοχή μεταφοράς θερμότητας και την επίδραση της διάτμησης της διάτμησης και να αποφύγει τα υλικά ευαίσθητα στη θερμότητα ή το αποτέλεσμα των φαινομένων συσσωμάτωσης σωματιδίων.

Senate gas system:

The multipurpose high effective drying machines have joined the uniques senate gas system, greatly improving the drying rate materials.

Εξοικονόμησης ενέργειας:

Compared with traditional drying equipment, for example,bipyramid vacuum drying machine, tray vacuum drying machine, hot air oven and so on.

1. In the same condition of volume, charge materials can be increased more than one time.

2. In the same condition of energy consumptions, it can be incrased to two times to five times in drying production.

3. Drying time is less than one third of traditional drying machine.

Heating method of screw dryer oven

For the heating method of the tray vacuum dryer, it can use the steam or hot water or heat transfer oil as heat source. However, the above heat sources cannot be provided by end user. Hywell machine can provide electric heating heat transfer oil furnace or electric heating hot water tank. Specific can be designed according to customers.

Condensation recovery unit of screw blending dryer

If the material contains a large amount of solvents such as methanol, ethanol, etc. The solvent of raw material can be collected by using a condenser. But the condenser to recollected the solvent that need user to supply cooling water, If the solvent is water or low proportion of solvents , the condenser is not required in order to save investment cost.

Tube model condenser of vacuum dryer

There are two types of vacuum dryer condensers in Hywell company. One is the traditional tube condenser. This condenser is made of seamless steel pipes that arranged inside the condenser cover. The outside of the tube is equipped with cooling fins to increase the condensation efficiency.

Hose wound tube condenser of rotary vacuum dryer

The other is a metal hose condenser. The condenser is undoubtedly a seamless metal hose wrapped inside the condenser. so the same heat exchange area, the outside size of hose wound condensor is smaller than the tube condenser and cost is also cheaper. now Hywell company almost use this kinds Hose wound tube condenser

Conical screw vacuum dryer construction material

Hywell Machinery are able to offer our HW series vertical screw vacuum dryer with contact part to be built in SS304, SS316L, Titanium, Duplex stainless steel, etc. Electrical parts of control system of the drying machine can be adapted to the customer's needs.

How do the Vertical Ribbon Dryer works

The construction of Hywell Machinery HW series vertical ribbon Dryer is very compact: it consists of a cone vessel with the drive unit on the top and discharge valve at the bottom, and a tapered ribbon mounted on the central shaft. In the cone vessel, there is a central tapered ribbon with very small clearance between its edge and the wall, The ribbon moves the materials upward along the vessel wall to the top, where the materials then drop by gravity into the center. During this continuous operation, material particles and heat are exchanged quickly which leads to a homogeneous product. Besides, the material particles are mixed with minimal mechanical and thermal stress, which makes this type of mixer a good solution for fragile and heat sensitive product.

The machine main technical parameter is reference, we also produce and design product as per customers' requirement.